RHP 6626 Series Pond Fountains
Greater Volume, Bigger Displays
Use in clean or dirty water ponds.
The new Asynchronous pumps can be cleaned rather than thrown away!
Water with high dirt and mineral concentrations is detrimental to motor seals. The asynchronous pump design eliminates the possibility of seal failure due to overheating.
Pump: 6600 gallons per hour, 115v, 3/4HP, 593 watts, 5.3 AMP, Asynchronous Energy efficient, much higher volume, no motor seals to wear in dirty/abrasive water.
Nozzles Four Nozzle patterns (shown above) included.
Heights: 14-16 feet. Widths up to 30 feet.
Float: 26" Professional Series poly molded float w/brass inserts for attaching optional light fixtures.
Power Cord: 100' w/standard 3 prong plug end.
Timer: Optional Intermatic P1261P Timer with GFCI
Filter: Intake screen/debris filter included.
GFCI: Ground Fault Circuit Interrupter Electrical Protection Included.
Warranty: 1 Year Limited Warranty Note: The original pump, wire and attached waterproof splice must be returned, in its entirety for pump warranty consideration, any deviation from this requirement will void all warranties.
Anchoring Line: 50' of anchoring line included.
Lighting Options: Easy to install 3 fixture MR-16 LED light sets for night time illumination
Approximate Operating Cost: $ .06-.10 per hour
Minimum Water Depth: At least 2-3 feet of water recommended
Note: The original pump, wire and attached waterproof splice must be returned, in its entirety for pump warranty consideration, any deviation from this requirement will void all warranties.